User Manual

SELECT THE SPLIT POINT
Because your piano is an “ensemble” piano, there are many special functions that will occur on the
left side of the keyboard starting on a particular key, progressing to the left. Where this happens is
programable. (This is called the “split point”)
The default position of the Split point is F3#. (Counting from the left, the third octave of the F#
Key)
The Split Point (or CHORD POINT) can be set to any other key as follows:
- Press and hold the LEFT button and the display will indicate:
55 is the corresponding value to F3# note. (55, Counting from the right)
- Using the Data Control wheel it is possible to select a different value for the Split/Chord
point. The display will return to the normal display mode and the new Split/Chord Point is
now set.
- The Split/Chord point will be restored at F3# (value 55) at power up.
DIGITAL REVERB
The Reverb simulates the effect of playing in a big room or a hall where the sound reverberates off
the walls and ceiling. The reverb effect is automatically selected when the piano is turned on.
Press the REVERB button to turn the reverb effect Off and the indicator will go out.
Switch the reverb feature On and Off by pressing the REVERB button.
There are eight reverb effects available:
1-Hall, 2-Hall2, 3-Room1, 4-Room2, 5-Room3, 6-Stage1, 7-Stage2 and 8-Plate.
- Press the REVERB button On and the reverb type is shown in the display.