D i g i t a l P i a n o s STAGE STARTER Portable Piano CDP 1 Digital Piano O w n e r 's M a n u a l M a n u a l e d’ u s o 1
D i g i t a l P i a n o s STAGE STARTER Portable Piano CDP 1 Digital Piano O w n e r 's Manual 3
SAFETY PRECAUTIONS AND INSTRUCTIONS WARNING Make sure that the voltage set is suitable for the instrument (the voltage is indicated next to the AC power inlet). When using electric products, always follow basic precautions, including the following: 1 Read all of these instructions before using the product. 2 To reduce the risk of injury, close supervision is necessary when the product is used near children.
DANGER Do not modify the plug provided with the product - if it will not fit - have a proper outlet installed by a qualified electrician DISCLAIMER The information contained in this manual has been very carefully revised. Due to the constant effort to improve the product, the product specifications might differ to those in the manual. The specifications are subject to modification without prior notice.
INTRODUCTION Welcome to the high tech world of electronic instruments. Your piano has been designed and made using the latest technology and computerized systems, to offer you years of trouble free pleasure. Read this manual carefully in order to fully exploit the potential of your instrument. Stage Starter Portable Digital Piano CDP 1 Console Digital Piano POWER ON To turn on the instrument simply push the On/Off switch.
SUSTAIN PEDAL STAGE STARTER – it is supplied with a Sustain Pedal. An optional 3 pedal unit is also available. CDP 1 – It is supplied with the 3 pedal unit. STAGE STARTER Digital Piano is supplied with a Sustain Pedal. Connect the Sustain Pedal to the Pedal Input Sustain/Sostenuto to obtain the Sustain effect when used. It has the same function as the ''sustain'' pedal on the acoustic piano. It provides sustain and lets the sound slowly decay after the keys have been released.
SELECT KEYS There are two groups of 3 WHITE KEYS, the 3 Lowest to the Left and the 3 Highest to the Right, that are used as SELECT KEYS if pressed at the same time. These will allow all the changes in the instrument. You can use either the Left group or the Right group whichever is most convenient. DEMO SONGS It is possible to select 6 DEMO songs on the instrument keyboard by pressing and holding the 3 white SELECT keys and the keys related to the DEMO SONGS.
Here find the sound list: Nr Key Sound Name Nr Key Sound Name 1 E 0 - Mi 0 Grand Piano 9 F 1 - Fa 1 Nylon Guitar 2 F 0 - Fa 0 Upright Piano 10 G 1 - Sol 1 Church Organ 3 G 0 - Sol 0 Electric Piano 11 A 1 - La 1 Chapel Organ 4 A 0 - La 0 Harpsi 12 B 1 - Si 1 Jazz Organ 5 B 0 - Si 0 Slow Strings 13 C 2 - Do 2 Grand Piano & Strings – Layer 6 C 1 - Do 1 Fast Strings 14 D 2 - Re 2 Grand Piano & Strings – Split 7 D 1 - Re 1 Vocals 15 E 2 - Mi 2 Electric Piano & Strin
TOUCH SENSITIVITY Just like an acoustic piano, your instrument has an 88 note keyboard with velocity control. This means the level of the audio signal will be in proportion with the velocity of the key pressed. If you play soft you will have a quiet sound, while if you play very hard you will have a much louder sound . The TOUCH SENSE button allows you to select 3 different touch sensitivity curves: 1 - HARD 2 - NORMAL 3 - SOFT TOUCH ON/OFF.
REVERB The DIGITAL REVERB effects expand the sounds of your instrument giving your music a new dimension. The instrument has three different Reverb Type: 1 – Room 2 – Hall 3 – Theatre. If the REVERB effect is selected , it will stay switched ON even if a different sound is selected while playing. 1. 2. 3. 4. NOTE: For the For the For the For the ROOM setting, hold the 3 white SELECT keys and press the F#5. HALL setting, hold the 3 white SELECT keys and press the G#5.
PITCH – Fine Tuning In those cases where transposition by semitones is not enough, and a more accurate tuning is necessary, it is still possible to change pitch. To change the PITCH of the instrument, hold the 3 white SELECT keys and press the desired key for the PITCH control UP (A#3) or DOWN (G#3) as many times until you hear that the new Pitch value is set as desired. The Pitch Range will change by max 1 Semitone down and 1 semitone up.
4 - To stop METRONOME feature, hold the 3 white SELECT keys and press the key related to the selected time signature that is now playing. TWIN FUNCTION This is a nice teaching feature that allows two players (teacher and pupil for example) to play at the same time on the same instrument and in the same octave. To select the TWIN function – to split the keyboard in two half for practicing teacher/student - hold the 3 white SELECT keys and press the C#2 key related to the selected to the feature.
CONNECTIONS USB TO HOST It is possible to connect the instrument to a computer using the USB port located in the back panel of the instrument and control the Midi parameters. PEDALS Soft – Sostenuto/Sustain These two jack plugs are used to connect the pedals available with the instrument. STAGE STARTER – it is supplied with a Sustain Pedal. Connect it to the Pedal Input Sustain/Sostenuto to obtain the Sustain effect when used. CDP 1 – It is supplied with a complete set of 3 pedals.
STAGE STARTER – CDP 1 Digital Piano - MIDI IMPLEMENTATION CHART -------------------------------------------------------------------------------------------------------------------------FUNCTION TRANSMITTED RECOGNIZED REMARKS -------------------------------------------------------------------------------------------------------------------------Basic Channel Default 1 1 to 16 Ch. 10 omitted Changed 1 1 to 16 Ch.
D i g i t a l P i a n o s STAGE STARTER Portable Piano CDP 1 Digital Piano M a n u a l e d’ u s o 17
ISTRUZIONI E MISURE DI SICUREZZA AVVISO IMPORTANTE Accertarsi che il voltaggio impostato sia adatto allo strumento (il voltaggio è indicato a fianco della presa di corrente). Quando si utilizza un'apparecchiatura elettrica, si devono sempre rispettare le basilari norme di sicurezza, tra cui: 1 Leggere le istruzioni prima di utilizzare lo strumento. 2 Per ridurre il rischio di incidenti, occorre prestare particolare attenzione quando lo strumento viene utilizzato in presenza di bambini.
ISTRUZIONI PER LA MESSA A TERRA Lo strumento deve essere collegato con messa a terra. In caso di mal funzionamento o guasto, la messa a terra fornisce una via di resistenza minima per la corrente elettrica e riduce il rischio di scossa elettrica. Lo strumento è dotato di cavo con conduttore e spina per la messa a terra. La spina deve essere inserita nell'apposita presa della corrente che deve essere installata e messa a terra in conformità ai regolamenti e alle normative locali.
INTRODUZIONE Benvenuti nel mondo hi-tech degli strumenti elettronici. Lo strumento è stato progettato e realizzato utilizzando le più recenti tecnologie e sistemi computerizzati per offrire anni di svago senza problemi. Leggere con attenzione questo manuale in modo da poter sfruttare al massimo le qualità dello strumento. Stage Starter Portable Digital Piano CDP 1 Console Digital Piano ACCENSIONE Per accendere lo strumento premere l'interruttore On/Off.
PEDALE SUSTAIN Lo STAGE STARTER - è dotato di un pedale Sustain. Un pedale a 3 leve – per duplicare tutte le funzioni di un pianoforte acustico - è opzionale. Il CDP 1 - E 'fornito con il set completo di 3 pedali. STAGE STARTER - Pedale Sustain. Per ottenere l'effetto Sustain, collegare il pedale alla presa jack Pedal - Sustain/Sostenuto (nel pannello posteriore). Il pedale ora avrà la stessa funzione del 'Pedale Sustain' che troviamo sul piano acustico.
TASTI DI SELEZIONE Ci sono due gruppi di 3 tasti bianchi, i primi 3 tasti a sinistra e gli ultimi 3 tasti a destra della tastiera, che vengono utilizzati come “tasti di selezione” se premuti contemporaneamente. Tenere premuti questi tasti e premere il tasto relativo al nuovo suono o alla nuova funzione. Dopo aver premuto il tasto desiderato, rilasciare i 3 tasti bianchi SELECT. L'intera tastiera ora suonerà con il nuovo suono selezionato o la nuova funzione selezionata.
Ecco l'elenco dei suoni: Nr Key Sound Name Nr Key Sound Name 1 E 0 - Mi 0 Grand Piano 9 F 1 - Fa 1 Nylon Guitar 2 F 0 - Fa 0 Upright Piano 10 G 1 - Sol 1 Church Organ 3 G 0 - Sol 0 Electric Piano 11 A 1 - La 1 Chapel Organ 4 A 0 - La 0 Harpsi 12 B 1 - Si 1 Jazz Organ 5 B 0 - Si 0 Slow Strings 13 C 2 - Do 2 Grand Piano & Strings – Layer 6 C 1 - Do 1 Fast Strings 14 D 2 - Re 2 Grand Piano & Strings – Split 7 D 1 - Re 1 Vocals 15 E 2 - Mi 2 Electric Piano & String
TOUCH SENSITIVITY Proprio come in un pianoforte acustico, il vostro strumento ha una tastiera 88 tasti con il controllo della velocità. Ciò significa che il livello del segnale audio sarà in proporzione alla velocità del tasto premuto. Se si suona in modo morbido si avrà un suono tranquillo, mentre se si suona con maggiore intensità si avrà un suono molto più forte.
REVERB Gli effetti di riverbero digitale espandono i suoni del tuo strumento dando alla vostra musica una nuova dimensione. Lo strumento ha tre differenti tipi di Reverbero: 1-Room 2-Hall 3-Theatre. Se si seleziona l'effetto REVERB, mentre si suona, esso rimarrà acceso anche se verrà selezionato un suono diverso. 1. Per selezionare 2. Per selezionare 3. Per selezionare 4. Per selezionare ROOM, tenere premuti i 3 tasti bianchi SELECT e premere il tasto Fa#5.
PITCH – Intonazione fine Nei casi in cui la trasposizione per semitoni non sia sufficiente e una messa a punto più accurata sia necessaria, è ancora possibile cambiare il Pitch. Per cambiare il Pitch dello strumento, tenere premuti i 3 tasti bianchi SELECT e premere il tasto desiderato per il controllo PITCH UP (La#3) o PITCH DOWN (Sol#3) fino a raggiungere la frequenza desiderata. Il Pitch può essere cambiato di max 1 semitono verso il basso e 1 semitono verso l’alto.
4 - Per interrompere la funzione di metronomo, tenere premuti i 3 tasti bianchi SELECT e premere il tasto relativo al tipo di metronomo che si sta usando. Funzione TWIN Questa è una caratteristica utile per l’insegnamento che permette a due persone (Es: insegnante ed alunno) di suonare contemporaneamente con lo stesso strumento sulle stesse ottave. Per selezionare la funzione TWIN (divide la tastiera in due metà uguali) premere i 3 tasti bianchi SELECT e premere il tasto Do#2.
CONNESSIONI USB HOST È possibile collegare lo strumento ad un computer mediante la porta USB situata sul pannello posteriore dello strumento e controllare i parametri MIDI. PEDAL Queste due prese jack sono utilizzate per collegare i pedali disponibili con lo strumento. Queste prese si possono utilizzare per i tre pedali del pianoforte e in alternativa anche per un pedale volume. STAGE STARTER - è dotato di un pedale sustain.
STAGE STARTER – CDP1 Digital Piano - MIDI IMPLEMENTATION CHART -------------------------------------------------------------------------------------------------------------------------FUNCTION TRANSMITTED RECOGNIZED REMARKS -------------------------------------------------------------------------------------------------------------------------Basic Channel Default 1 1 to 16 Ch. 10 omitted Changed 1 1 to 16 Ch.