User Manual

system will automatically enter the Rear tire Low
pressure set up mode.
Rear Tire-Low Tire Pressure Setting Mode
Setp Operating Process
Photograph
a
The system will enter the Rear Tire low pressure
set up mode automatically after set up the Front
Tire Low Pressure set up mode.
b
The wireless receiver and display unit will now
show the low tire pressure factory default value
(2.3bar) shown in blue light and the yellow light
indicates the ”bar”. or pre-selected units ( kPa or
psi), if do not to modify anything, then press the
Set Up buton for enter next setting mode.
NOTE: If the pressure unit is kPa the display will
show 230 and 32 for Psi by flasing
c
By pressing the Mode key
once, the low
tire pressure value will add 1 unit; and the unit
value will add 0.1 bar by each press, when it has
reached 2.8 bar the system unit will return to 19
bar.
NOTE: If the user is settee by kPa, will add 10
kPa by each pressing, the range for kPa is
190kPa~280kPa, and 27 psi ~ 40 psi for PSI
unit.
d
Press the setup key
to exit the low tire
pressure warning value setup mode. The
system will automatically enter the tire
temperature set up mode.
Tire Temperature-Over Temperature Warning
Step Operating Process Photograhp
a
The system will enter the Over Tire Temperature
set up mode automatically after set up the Rear
Tire Low Pressure set up mode.