User Manual

b
The display shows on the figure is the tires
factory default high temperature value (80
o
C) for
the tires in blue. If there is no modification to the
user, then press the Set Up button to enter the
next set up mode.
NOTE: If the unit is ℉ the number will be
flashing in 176.
c
Press the function key
to change the high
temperature figure, the unit will add 1 ℃ by each
pressing, the range for temperature set up are
between 60℃~99℃, the system will return back to
60℃ after 99℃.
NOTE: If the unit is ℉, will add 1℉ on each
pressing, the range for ℉ is from 140℉~212℉
d
Push the setup key
to complete the Over
Tire temperature setting operation and the
display will enter to the turn on mode.
Power On Setting Mode
Step Operating Process Photograph
a
The system will enter the Power On set up mode
automatically after Over Tire Temperature set
up mode.
b
The display shows on the figure is factory
default for tire pressure value is bar in yellow.
NOTE: The system may use other unit for
pressure by psi, kPa or bar, depending the
system for different area of the world.