User Manual

Description for each set up process
Mode 1: Front and Rear tire exchange
The monitor will show up as below photograph, the NO. 1 which shows in yellow means the mode 1,
and the 4 red lights means the tire position before reset as shows in pic. 1, the 4 green lights means the
mode 1 has been completed set up.
Press the Set Up button continuously for 2 sec. until sounds Beep which means has accomplished the
set up for mode 1. (Front and Rear Tires Exchange)
Pic. 1 Pic. 2
Mode 2: Tire Diagonal Exchanged.
The monitor will show up as below photograph (Pic. 1 and Pic 2), the No. 2 in yellow means in mode 2.
and the 4 red lights means the tire position before reset as shows in pic. 1, the 4 green lights means the
mode 2 has been completed set up.
Press the Set Up button continuously for 2 sec. until sounds Beep which means has accomplished the
set up for mode 2. (Tire Diagonal Exchange), then the system will back to the normal operating
display.
No. 4
No. 3
No. 1
No. 2
FRONT
No4
No 3
No 1
FRONT
No 2