User Manual

Pic. 1 Pic. 2
模式 3：Front Tire Diagonal exchange, Rear Tire parallel change to the front
The monitor will show up as below photograph (Pic. 1 and Pic 2), the No. 3 in yellow means in mode 3.
and the 4 red lights means the tire position before reset as shows in pic. 1, the 4 green lights means the
mode 3 has been completed set up.
Press the Set Up button continuously for 2 sec. until sounds Beep which means has accomplished the
set up for mode 3. ( Front Tire Diagonal Exchange, Rear Tire Parallel exchange to front), then the
system will back to the normal operating display without any changing.
Pic 1 Pic 2
Mode 4 Random re-position tires
The user should install the tire to their random position before enter mode 4.
The monitor will display No. 4 in yellow which means Mode 4.
The user should reset from Right Front Tire -> Right Rear Tire -> Left Rear Tire -> Left Front Tire in
order to complete the set up mode 3.
No 4
No 3
FRONT
No 1
No 2