User's Manual Part 2

32
Installation of the tri-channel NAVTEX antenna
The NAVTEX antenna should be mounted vertically, in an elevated position. Metal,
rigging or other antennas must not be located in the 'NO GO cone' surrounding the
upper part.
Use the mounting bracket supplied; an alternative mounting kit may be purchased if
the mounting arrangement is unsuitable for your installation.
Attach the clamping brackets to the antenna mounting adapter and use the
clamping arrangement to fix to a suitable vertical tube.
Thread the PL259 connector end of the coax cable through the antenna mounting
adapter and secure the connector to the antenna 1" threaded adapter.