User's Manual

ManualsBrandsOrolia ManualsElectronicsSafeLink Distress Beacon

Table Of Contents

1. INTRODUCTION
- 1.1. Présentation du système COSPAS-SARSAT
- 1.2. Déclenchement de l’alerte et calcul de la position
2. PRESENTATION
- 2.1. Description du conteneur et du support mural
- 2.2. Description de la balise
3. INSTRUCTIONS DE TESTS
4. UTILISATION
- 4.1. Activation automatique
- 4.2. Activation manuelle
5. FAUSSES ALARMES
- 5.1. Prévention des fausses alarmes
- 5.2. Désactivation de la balise
6. INSTALLATION DE LA BALISE
- 6.1. Montage de la plaquette d’instructions
- 6.2. SafeLink Auto Catégorie 1 (Pont)
  - 6.2.1. Installation du conteneur
  - 6.2.2. Installation de la balise dans le conteneur
- 6.3. SafeLink Manual+ catégorie 2 (Survie)
  - 6.3.1. Installation du support
  - 6.3.2. Installation de la balise dans le support
7. SPECIFICATIONS TECHNIQUES
8. DECLARATION D'ENREGISTREMENT
- 8.1. Général
- 8.2. Enregistrement au Canada
- 8.3. Licence radio au Canada
9. MAINTENANCE
10. REMPLACEMENT DES PILES
- 10.1. Démontage du pack piles
- 10.2. Remontage du pack piles
11. REMPLACEMENT DU LARGUEUR HYDROSTATIQUE
- 11.1. Description
- 11.2. Remplacement
1. INTRODUCTION
- 1.1. COSPAS-SARSAT system description
- 1.2. Immediate alerting and location calculation
2. DESCRIPTION
- 2.1. Container and mounting bracket description
- 2.2. Beacon description
3. TEST INSTRUCTIONS
4. INSTRUCTIONS FOR USE
- 4.1. Automatic activation
- 4.2. Manual activation
5. FALSE ALARMS
- 5.1. False alarms prevention
- 5.2. Beacon de-activation
6. BEACON INSTALLATION
- 6.1. Mounting instructions plate
- 6.2. SafeLink Auto Category 1 (Float Free)
  - 6.2.1. Installation of container
  - 6.2.2. Installation of beacon into container
- 6.3. SafeLink Manual+ category 2
  - 6.3.1. Mounting bracket installation
  - 6.3.2. Installation of beacon into its mounting bracket
7. TECHNICAL SPECIFICATIONS
8. REGISTRATION
- 8.1. Importance of accurate registration
- 8.2. Registering in USA
- 8.3. Radio License in USA
- 8.4. Registering in Canada
- 8.5. Radio License in Canada
9. MAINTENANCE POLICY
10. BATTERY REPLACEMENT
- 10.1. Battery pack removal
- 10.2. Battery pack reassembly
11. AUTOMATIC RELEASE SYSTEM REPLACEMENT
- 11.1. Description
- 11.2. Replacement

DOC09028A

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS LANG7 LANG8 LANG9 LANG10 LANG11 LANG12

2. DESCRIPTION

SafeLink beacons are Emergency Position Indicating Radio Beacons (EPIRB) Float Free version category 1

(SafeLink Auto) or non Float Free version category 2 (SafeLink Manual+). Both versions are fitted with a built-in GPS.

2.1. Container and mounting bracket description

The beacon is supplied either in an automatic container (A) for the Float Free version category 1, or with a wall

mounting bracket for the Non Float Free version category.

The container (A) is designed to protect the beacon and to ensure its automatic release in the event of a ship wreck

thanks to the HAMMAR H20 release system (1A). This container is also fitted with a locking pin (2A).

It is mounted either in horizontal position on the wheel house or deck of the vessel, or in vertical position against a

bulkhead or any vertical and flat surface (§ 6.2.1. Installation of container).

When installed in its container, a magnet avoids beacon activation (water, moisture)

The wall mounting bracket (B) is designed to be mounted vertically against a bulkhead or any vertical flat surface.

The mounting bracket is fitted with a locking pin (1B). When installed in its mounting bracket, a magnet avoids

beacon activation (water, moisture).