Installation Manual

Some materials present inside electronic enclosures may present a health hazard if not handled correctly.
Be sure to clean hands after handling equipment. Do not place any equipment in mouth.
Informing Emergency Personnel
Compile the following information for emergency personnel:
Location of accident (e.g. address, front / back of building, etc.)
Nature of accident (e.g. possible heart attack, run over by car, burns, etc.)
Age of victim (e.g. baby, teenager, middle-age, elderly, etc.)
Whether or not victim has received first aid (e.g. stopped bleeding by pressure, etc.)
Whether or not victim has vomited (e.g. if swallowed or inhaled something, etc.)
Warning: Oxygen may be needed at scene if gasoline has been ingested or inhaled. Seek
medical advice immediately.
Note: The maximum available current from the building installation (AC / DC power
supply) shall be less than 85A under any single fault condition.
North American Directives
For UL standard for North America, “TYPE 4 Enclosure” must be stated in the instructions.
European Directives
The OrPAY1000 complies with the necessary European Directives for the CE mark.
Laser Warning
Some models of the TR500 incorporate a barcode reader. The barcode reader incorporates a laser aiming
system. The Laser has a Class 2 output power to IEC 60825-1:2007:
Caution: Do not stare into laser beam.
3.3. Preliminary Considerations
The following factors need to be considered in designing an installation for the TR500:
Physical Dimensions
The following displays the physical dimensions of TR500 (see Figure 3-1):
TR500 Installation and Setup Manual 17