User's Manual

FCC Compliance Statement for DataPass/µDataPass 2
N
N
O
O
T
T
E
E
Please check the manufacturer
specifications for the proper protocol
supported by the Vehicles in your
fleet!
The System comprises several parts installed in various configurations as follows (see
Figure 1-2):
• DataPass Harness – used in conjunction with the DataPass; it connects the
DataPass to the Diagnostics plug rear wiring in heavy vehicles.
DataPass for light vehicles (OBD-II), Cat No.
800907300
DataPass (J1708/FMS) for heavy vehicles, Cat
No. 800907310
Figure 1-2. DataPass
1.3. DATAPASS – TECHNICAL SPECIFICATION
1.3.1. Communication
 Wireless Interfaces
Single IEEE802.15.4 wireless channel
Operating Frequency ISM 2.405 to 2.480 GHz (Global license free band)
Implements proprietary Mesh network
 IEEE802.15.4 Modem
DSSS/FA - Direct Sequence Spread Spectrum with Frequency Agility
Supported network topologies –Propriety Mesh network
Channel capacity – 16 frequency channels / 5MHz channel spacing
Transmit power output – 2mW (3dbm)
Receive sensitivity – (-101dbm)
 Wireless Antenna
Built in PCB Antenna