Use Instructions

Orpyx

SI – Instructions for Use

Version 1.0 – August 2019

Page 22 of 26

8. Technical Information, Specifications and Warranty

RADIO FREQUENCY STANDARDS

This device produces radio-frequency emissions. Radio-frequency (RF) emissions from electronic

equipment can impact the operation of other electronic equipment, causing them to malfunction.

Although the Orpyx

SI sensory insoles is designed, tested and manufactured to comply with

regulations governing radio frequency emission in countries such as the US and Canada, the wireless

transmitters and electrical circuits in the Orpyx

SI sensory insoles may cause interference in other

electronic equipment. Therefore, please take the following precautions:

Travel or International Use

If you plan to travel with the Orpyx

SI sensory insoles, please note that the product uses wireless

communication, and is not to be used during flight. If you are traveling outside of the United States

or Canada, check with your travel agent prior to travel to ensure that the use of wireless products is

permitted in your country of destination.

Pacemakers

The Health Industry Manufacturers Association recommends that a minimum separation of 6 inches

(15 cm) be maintained between certain RF emitting devices and pacemakers in order to avoid

potential interference between these devices. Persons with pacemakers should always keep the

Orpyx

SI sensory insoles at least 6 inches (15 cm) from the pacemaker when the device is active.

Hearing Aid Compatibility

The Orpyx

SI sensory insoles may interfere with some hearing aids. If you experience interference,

consult your hearing aid manufacturer or your physician for solutions or alternatives.

Other Medical Devices

If you use any other personal medical devices, consult the medical device manufacturer to ensure

that these devices are adequately shielded from RF emissions produced by devices such as the

Orpyx

SI sensory insoles.

Health Care Facilities

Hospitals and healthcare facilities may use equipment that is particularly sensitive to external RF

emissions. Disconnect your system to ensure it is not transmitting when hospital staff or signage

instructs you to do so.

Other Wireless Technologies

The Orpyx

SI sensory insoles system is FCC compliant. However, there may be some newer wireless

technologies that interfere with the RF emissions of this device. Please consult the manufacturers of

these devices to ensure compatibility with the Orpyx

SI sensory insoles.