Use Instructions

Orpyx
®
SI – Instructions for Use
Version 1.0 – August 2019
©2019 Orpyx
®
Medical Technologies Inc. - All rights reserved. All trademarks and registered trademarks are the property of their respective owners.
Page 9 of 26
STEP 7
Click the settings icon in the upper right-hand
corner of the mobile application and click the
“Select Devices” button.
You have 60 seconds to pair with your insoles. Find
your left and right insole serial numbers listed on
the back of your box (see image below).
STEP 8
When you plug in your insoles, two grey footprints
will appear and their corresponding serial
numbers. Select the left and right insoles by
tapping on the footprint icons (once selected they
will turn blue). Click the “Done” button on the
bottom.
Your device will timeout after 60 seconds if not
selected.*
If pairing is unsuccessful, please repeat steps 6 to
8.