Installation Instruction

4 Fill the gap
s
5 Painting
II
I Painting
by spray by gun
1) Painting the surface with water-based primer in
order to sealing the surface and maintain the boards
dry, so that expansion and contract can be reduced. It
will be better if painted twice
2) It will take at least two hours to dry, and the time
will be a little longer in Winter and wet seasons.
1)Fill the gaps with acrylic emulsion caulking along
in one direction. The caulking must be water-based
and paintable..
3) The Acrylic Emulsion caulking can be also used
to re
p
ai
r
flaws, holes and defects of the boards
2)It usually takes two hours to ensure the caulking dry
enough, then use the sandpaper (120-300MU) or dry
cloth clean the the gaps to ensure all the gaps are
smooth and flat
1) Make sure the surface is dry and clean, brush or spray
the wall with water-borne wood paint and maskingtape is
recommended for protection if margins will be kept, it
usually need to be painted twice, and each time about
2hours, if the humidity is over 60%, it will take more than
two hours.
2) Colour of paint. Paints of designated colour can be
processed by professionals when buying it
It’s better to use the spray guy to pait the wall, it will be
more smooth and even, Suggest used the Earlex spray gun.
Which come from England, it’s small and very convenient,
especially there is not pollute for the enviroment. It also
can save the paint
Installation Instruction
3 Priming