Assembly Instruction

120-277V Input 52W LED

Page 1 of (2)

Please consult your electrician for hanging fixture and wiring.

MADE IN CHINA

WARNING: Wires need to be connected to driver

found in canopy and should not be connected directly

to power source or a short may occur .

This fixture is designed to dim with an

Electronic Low Voltage dimmer. Dimming

levels will vary by dimmer.

Below is a List of Recommended Dimmers:

Lutron DVELV-330P

Lutron MAELV-600M

Lutron SAELV-153P

Leviton IPL06-10Z

Leviton 6674-POW

Legrand Tru-Universal ADTP703TUW4

Due to inrush current wattage should not

exceed 150 watts of product for a 600 watt

dimmer.

PRODUCT NAME:LED Pendant

PAGE 1
PRODUCT NAME:LED Pendant Please consult your electrician for hanging fixture and wiring. This fixture is designed to dim with an Electronic Low Voltage dimmer. Dimming levels will vary by dimmer. Below is a List of Recommended Dimmers: Lutron DVELV-330P Lutron MAELV-600M Lutron SAELV-153P Leviton IPL06-10Z Leviton 6674-POW Legrand Tru-Universal ADTP703TUW4 Due to inrush current wattage should not exceed 150 watts of product for a 600 watt dimmer.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (A) Mounting Bracket (B) Canopy (c) G4 LED Bulb Locate all hardware & components before discarding packaging A 1.) 0UTLET BOX Step.1: Remove Mounting Bracket (A) from Canopy to install to electrical box. A 0UTLET BOX A 2.) B B Step.2: Wire fixture to wires in outlet box. Bare wire is for Ground. Secure canopy(B) to mounting bracket using screws on the sides of the canopy. 3.) Step.