Installation & Assembly

2.)
1.)
3.)
Bracket (A)
Canopy(C)
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (2)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
Step1 :Remove mounting bracket
from fixture and install to electrical
box.
Green/Ground
(A)
White/Neutral
Black/Positive
(C)
Screws(B)
Step3 : Install fixture to bracket and
Ball Nuts at the ends of the canopy to
secure.
A
B
C
D
(B)
(A)
Ball
Nuts(D)
(C)
(D)
Step2 :Adjust wire length to desired
mounting height, and tighten strain
relief screws to secure. Wire fixture
to wires in outlet box. Green wire is
for Ground.