Caution : You must read this before you proceed MODERN CHAIR Page 1 OF 5
Label Description QTY A Chair 1 B Leg 2 Description QTY ① Bolt (M6*15 MM) 13 ② Allen Key 1 Label Before Beginning Assembly: Picture Picture Marked "Front" Marked: Back" Page 2 OF 5
Overview Chair(A) Back Front FRONT FACING Leg(B) This Modern Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Modern Chair, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Lay the Chair(A) on a clean, non-marring surface. Attach Legs(B) to Chair(A) using Bolts(①) with Allen Key(②) as pictured above. Keep the Bolts slightly loosen.And then turn to Step 2 for leveling. Note: The front side of the Leg is at a right-angle and back side of the Leg is an oblique-angle. Step 2 Drop Test If wobble Test again 20～30CM Place the chair on a LEVEL SURFACE to check for wobbles.If it wobbles, lift the chair some 20cm to 30cm high from the ground.
Page 5 OF 5
