Caution : You must read this before you proceed Chaise Lounge Label Picture Description QTY A Seat Panel (WithAdjustable Back) 1 B Left Armrest/Leg 1 C Right Armrest/Leg 1 D Leg 1 E Support Bar 1 Page 1 OF 5
Label ① ② Picture ③ Description Bolt (M6*20MM) Bolt (M6*35 MM) Wahser QTY 9 7 16 ④ Allen Key 1 Before Beginning Assembly: Overview Left Armrest/Leg(B) Right Armrest/Leg(C) Seat Panel(A) Support Bar (E) FRONT FACING Leg(D) This Chaise Lounge has multiple parts and may require up to 30 minutes toassemble. To give you an overview of the Chaise Lounge parts, the above picture isto help you put the various parts into perspective.
Step 1 Open the carton and place all the parts onto a clean, non-marring surface. Place the Seat (A) facedown. Attach Legs(D) to Seat (A) using Bolts(①) and Washers(③) withAllen Key(④) as shown above. Do not fully tighten the Bolts. Step 2 Attach Right Armrest/Leg(C) to Seat (A) using Bolts(②)and Washer(③) with Allen Key(④) as shown above. Do not fully tighten the Bolts. Step 3 Attach Left Armrest/Leg(B) to Seat (A) using Bolts(②)and Washer ③ with Allen Key ④ as shown above. Do not fully tighten Bolts.
Step 4 Attach Support Bar (E) to Left Armrest/Leg(B) to Right Armrest/Leg(C) Bolts(①) and Washer ③ with Allen Key ④ as shown above. Do not fully tighten Bolts. Step 5 Stand the Chaise Lounge up. Place the Chaise Lounge on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected.Gently and carefully sitonto the Chaise Lounge. This will help to align all parts at all joints.Then get off the Chaise Lounge, and inasequential manner, proceed to tighten all Bolts.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
