Assembly Instructions

2 of 2

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut off power to the outlet box (A).

2. Make appropriate electrical connections using wire nuts:

a. Connect the transformer’s (B) live wire (black) to the live

outlet box wire.

b. Connect the transformer’s (B) neutral wire (white) to the

neutral outlet box wire.

c. Connect the ground outlet box wire to the inner pan (C)

using the green screw (included).

d. Carefully place connections and transformer (B) in outlet box (A).

3. Attach the inner pan (C) to the outlet box (A), secure with outlet

box screws (D).

CAUTION: Do not touch or press on the LEDs or damage will occur.

4. Carefully place the diffuser (E) into the outer pan (F) by aligning the

notches (G) in the diffuser with the posts (H) on the outer pan.

5. Install the outer pan (F) to the inner pan (C) by inserting the posts

(H) into the slots (J) on the inner pan, then twisting the outer pan

to the ends of the slots.

6. Restore power to the xture.

Note

• The outlet box must be at least 4” DIA and 1.5” deep to t the transformer.

• This xture is dimmable with Eletronic Low Voltage (Trailing-Edge) type dimmers only.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.

INSTRUCTIONS D’INSTALLATION

10" LED Surface Mount, 13" LED Surface Mount, 16" LED Surface Mount