Specifications

All dimensions provided are nominal.
Allowance must be made for dimensional tolerance in handcrafted glasses.
For ordering information, see next page
location:
WET
location:
WET
SPECIFICATIONS:
DESCRIPTION
Wall-mounted sconces featuring Opal glass with a decorative faceplate,
indoor/outdoor rated hardware.
LAMPING
Standard: 40W B10 medium-base 120V incandescent, lamp not included.
Dimmable with standard incandescent dimmer (not included).
CFL: 26W 4-Pin CFL with non-dimming electronic ballast.
Incandescent or CFL lamp not included.
LED: 8W Replaceable Source, 120V, non-dimmable, 80+ CRI, 3000°K CCT, 675
lumens, 30,000 hours, lamp included.
DIFFUSER
CONSTRUCTION
Stamped aluminum fitter and canopy-cover. Glass is secured by stainless steel set
screws.
METAL FINISHES
Aluminum powder-coated in Bronze, Black or Silver.
MOUNTING
Installs directly to a 4” octagonal outlet box, centered on fixture.
75°C supply wire required for incandescent lamping.
LABELS
UL Listed. Suitable for Wet Locations (interior or exterior use).
SILVER AND BARCLAY 18 IN BRONZE
SCONCES OUTDOOR
Diffuser shall be handcrafted glass of Opal decor with decorative faceplate.
5” W x 18” H x 4.125” D
5” W x 22” H x 4.25” D