Installation & Assembly

Package Contents
1of1
Crossbar
Assembly
x1
A
C
Fixture Body
x1
Mounting Screw
x4
B
STEP 1 Attach Crossbar Assembly to Outlet Box-
A. Attach the Crossbar Assembly (A) to Outlet Box and secure by
threading Outlet Box Screws (not supplied) into the Mounting Holes
on the Outlet Box. Tighten until snug.
A
Outlet
Box
Outlet Box
Screw
Figure 1
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.
Integrated12WLED
:LutronDVELV-300PorLutronSELV-300P.
ToolsRequired:
LightSource:
CompatibleDimmerSwitches
EstimatedAssemblyTime:
Preparation:
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer service for replacement
parts.
STEP 3 Attach Fixture Body to Crossbar-
A. Fit electrical wires in the backplate of Fixture Body (C) properly. Line
up the holes on the side of the backplate to the mounting holes on
the Crossbar Assembly (A). Secure them with Mounting Screws (B).
Tighten until sung.
Your fixture is now assembled and ready to use. Enjoy!
A
B
Figure 3
C
STEP 2 - Wire Connections
A. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
White wire
from supply
White wire
from fixture
Black wire from
supply (or Red)
Black wire
from fixture
Ground wire
from supply
Ground wire
from fixture
Figure 2
Backplate
FINISH: POLISHED CHROME
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO
THE NEAREST 1/4"
4.75”
27.75”
23.5”
3.25”
4.5”
4.75”
Assembly Instruction Sheet