Installation & Assembly

Important: Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

This light should be installed by a licensed electrician

LAMP INSTALLATION AND ASSEMBLY

1. Shut off power to the outlet box. (ﬁg. A)

2. Make appropriate electrical connections using wire nuts:

a. Connect the transformer’s live wire (black) to the live outlet box wire.

b. Connect the transformer’s neutral wire (white) to the neutral outlet box wire.

c. Connect ﬁxture’s ground wire (green or uncoated) to the ground outlet

box wire. If no ground is present in outlet box, connect ﬁxture’s ground

wire to the mounting plate using the green screw (included).

d. Carefully place connections in outlet box.

3. Attach the mounting plate to the outlet box, secure with outlet box screws.

4. Install the back plate to the mounting plate by hooking the bar inside the back plate

onto the bend on the mounting plate, secure with mounting screw.

5. Restore power to the ﬁxture.

CARE INSTRUCTIONS

Dusting – Use a clean, dry cloth.

Cleaning – To protect the ﬁnish,

avoid any harsh abrasives or chemicals.

outlet box

back plate

mounting plate

outlet box screw

mounting screw

Note: This fixture is dimmable with Electronic Low

Voltage (Trailing-Edge) type dimmers only.

Fig. B

bar

bend

Assembly Instructions

LED Double Sconce

PAGE 1
Assembly Instructions LED Double Sconce Important: Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance. This light should be installed by a licensed electrician LAMP INSTALLATION AND ASSEMBLY 1. Shut off power to the outlet box. (fig. A) 2. Make appropriate electrical connections using wire nuts: a. Connect the transformer’s live wire (black) to the live outlet box wire. b. Connect the transformer’s neutral wire (white) to the neutral outlet box wire.