LEGS AND HEADREST FOUND INSIDE Place the sofa (#2) face down onto a protected surface, then align the legs (#11) to each corner. Insert 4 screws (#D) into each leg and secure using a Phillips screwdriver. #D X 24PCS 1. Insert the headrests as displayed below. 2. Connect the right chaise and left sleeper love seat by sliding the hooks until secured.
#B #3 2. Insert 3 bolts (#B) into the long side and secure using the Allen wrench. #9 #B X 6PCS #C X 4PCS #A #C #C 1. Align the left and right connect #10 pieces (#9,10) to the inner holes, then insert 2 bolts (#C) into each. Secure using the Allen wrench (#A). #4 Align the wheels (#8) to each corner, #D X 16PCS then insert 4 screws (#D) into each. Secure using a Phillips screwdriver.
#5 Push the sleeper part into the bottom of the love seat, as displayed above. #6 Pull out the sleeper cushion as shown below.
