Installation & Assembly

Please consult your electrician for hanging fixture and wiring.

Page 1 of (2)

Warning!This fixture is supplied with an installed

LED driver. These fixtures are dimmable using

standard triac dimmer.For best operation we

recommend using Lutron CL Dimmers.

he fixture is designed to dim with a standard

Triac forward phase dimmer. Dimming levels

will vary by dimmer.

e to inrush current wattage should not

exceed 150 watts of product for a 600 watt

dimmer.

PAGE 1
Please consult your electrician for hanging fixture and wiring. The fixture is designed to dim with a standard Triac forward phase dimmer. Dimming levels will vary by dimmer. Due to inrush current wattage should not exceed 150 watts of product for a 600 watt dimmer. Warning!This fixture is supplied with an installed LED driver. These fixtures are dimmable using standard triac dimmer.For best operation we recommend using Lutron CL Dimmers.
PAGE 2
IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation (B) Screw Nut (A) Mounting Bracket (C) Anchors (G) Glass Locate all hardware & components before discarding packaging 1.) (A) (D) (C) Step.1: Remove mounting bracket from fixture and install to electrical box using screws (D). Mark where screws at ends of bracket (A) meet the ceiling. Remove mounting bracket (A) from ceiling. Drill holes using 3/16 "± drill bit where marked.