Installation & Assembly

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (2)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
Remove mounting bracket (A) from
fixture and install to electrical box.
3.)
Step.1:
1.)
Step.3:
(B)
Wire fixture to wires (B) in outlet
box. Copper wire is for Ground.
2.)
Step.2:
Adjust wire length to desired mounting
height using push pin strain relief. Install
fixture to bracket and tighten finials (C)
on the canopy to secure.
(A)
Mounting Bracket
(C)
Finial
(A)
(B)
(C)
(A)
(C)