Installation & Assembly

Due to the inrush current wattage should not exceed

150 watts of product for a 600 watt dimmer.

Please consult your electrician for hanging fixture and wiring.

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

MADE IN CHINA

Page 1 of (2)

PRODUCT NAME: LED Pendant

The fixture is designed to dim with a standard

Triac forward phase dimmer.Dimming levels

will vary by dimmer.

Below is a list of recommended dimmers:

Lutron MACL-153M

Lutron DVL-153P

Lutron SCL-153P

Leviton IPL06-10Z

Leviton 6674-POW

PAGE 1
PRODUCT NAME: LED Pendant Please consult your electrician for hanging fixture and wiring. The fixture is designed to dim with a standard Triac forward phase dimmer.Dimming levels will vary by dimmer. Below is a list of recommended dimmers: Lutron MACL-153M Lutron DVL-153P Lutron SCL-153P Leviton IPL06-10Z Leviton 6674-POW Due to the inrush current wattage should not exceed 150 watts of product for a 600 watt dimmer. PRODUCTS ARE NOT INTENDED FOR COMMERCIAL USE.
PAGE 2
IMPORTANT: Turn OFF the power at the main fuse or circuit breaker box before starting installation (B) Canopy Locate all hardware & components before discarding packaging 1.) Step.1: Run wire through stems (A) and combine stem lengths to meet desired mounting height. 2.) Step.2: Remove mounting bracket (C) from fixture and install to electrical box (D). Wire fixture to wires in outlet box (E). Green/Copper wire is for Ground.