Installation & Assembly

IMPORTANT: Turn OFF the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Page 2 of (2)
2.)
Step.1:
Step.2:
1.)
Run wire through stems (A) and
combine stem lengths to meet desired
mounting height.
Cleaning & Care:
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
Remove mounting bracket (C) from
fixture and install to electrical box (D).
Wire fixture to wires in outlet box (E).
Green/Copper wire is for Ground. Install
fixture to bracket and tighten screws (F)
on the sides of the canopy (B) to secure.
(B)
Canopy
3.)
Step.3:
Install the GU24 LED bulb (G) provided
and attach glass (H)