Installation & Assembly

Installation Instructions
1.Turn breaker off for circuit on outlet, where fixture is to be installed.
2.Remove mounting bracket from fixture and install it to electrical box.
3.Wire fixture to wires in outlet box. Green wire is for ground.
4.Install fixture to back-plate and tighten worm screws so that fixture meets the wall.
5.Caulk around back plate where it meets the wall using outdoor silicone sealant.
Warning:
These fixtures contain electronic drivers that cannot be operated with a dimmer of
any kind. Doing so will void the warranty.
Please consult your electrician for hanging fixture and wiring.