Installation & Assembly

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation

Locate all hardware & components before discarding packaging

Cleaning & Care:

Page 2 of (2)

Clean with soft cloth and a mild detergent.

Do not use abrasive cleaner.

Remove mounting bracket (A) from

fixture and install to electrical box.

3.)

Step.1:

1.)

Step.3:

Wire fixture to wires (C) in outlet

box. Copper wire is for Ground.

2.)

Step.2:

Adjust wire length to desired mounting

height, and tighten strain relief screws to

secure. Install fixture to bracket and

tighten screws (D) on the sides of the

canopy to secure.

(A)

Mounting Bracket

(B)

Anchors

(A)

(C)

(B)

(D)

(A)

(B)

(C)

(D)

Screw