Installation & Assembly

Installation Instructions

1. It is recommended the fixture be installed by a qualified licensed electrician.

2. Turn breaker off for circuit on outlet where fixture is to be installed.

3. Install rectangular mounting bracket to outlet box.

4. Determine mounting height of fixture and adjust wires accordingly.

5. Wire fixture to outlet. Connect white to neutral and green to ground.

6. Install fixture onto rectangular mounting bracket and tighten screws to secure.

The fix

ture is designed to with a standard Triac

forward phase dimmer. Dimming levels will

vary by dimmer.

ue to inrush current wattage should not

exceed 150 watts of product for a 600 watt

dimmer.

ARNING: Wires need to be connected to

driver found in canopy and should not connect

directly to power source or a short might occur.