Installation & Assembly

ManualsBrandsOrren Ellis Manuals6 Seat Kitchen & Dining TablesArche Extendable Glass Top Dining Table

STEP

Rotate

out the

glass

leaf,

and

slightly rotate

the legs

make

the

leaf

to be

parallel

the

main

glass

top

with

suitable

gap

and then

raise

the

leaf

up.

CAUTION:

This

glass

top

very

heavy

and needs

handled

4 people.

When assembling

sure

secure

the legs

position

they

can

not

tip

over.

The

legs

can

not

support

the

weight

the

table

the

side,

the legs

must

upright

all

times.Do

not

lift the

table

the

glass,

must

lifted

the legs

all

the

times.

STEP

Put

the

glass

top on

the

legs

and

half tighten

the

screws.

2-1

Summary of content (2 pages)

PAGE 1
2-1 STEP 1: Put the glass top on the legs and half tighten the 8 screws. STEP 2: Rotate out the glass leaf, and slightly rotate the legs to make the leaf to be parallel to the main glass top with suitable gap and then raise the leaf up. x CAUTION: This glass top is very heavy and needs to be handled by 4 people. When assembling be sure to secure the legs in position so they can not tip over. The legs can not support the weight of the table on the side, the legs must be upright at all times.
PAGE 2
-2 Caution: Overtightening can damage the table leg and mechanism. - STEP 4:FINISH --~ ~ ~ - .:> x ~ ~ - ~ ___;;;- Caution:Handle with care.After assembly, please move the legs but not carry the glass top to avoid bad damage of the table. STEP 3: Adjust the leaf glass to be lined up well with the glass main top. After this, tighten the 8 screws. The glass leaf will have 2mm wide tolerance with the glass main top it means glass leaf each side might have lmm wider or shorter then the main top.