ASSEMBLY INSTRUCTIONS Thank you for purchasing our product.
P.
P.2 BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. ❶ Do a quick inventory to make sure the package contains all the parts and hardware listed in the assembly instructions. ❷ Missing, damaged and defective parts can be replaced at no cost to you. Please refer to the last page in this manual. ❸ On each step read the instructions and analyze the illustrations thoroughly before proceeding to do the assembly. ❹ Make sure you understand which hardware will be used on each step.
P.3 ASSEMBLY STEPS STEP 1 Insert all the casters F into the base C using pressure, then place the gas lift E in the middle of the base C and cover it with H. H E C F STEP 2 Hardware I M6x20 4 Pcs Assemble the mechanism D to the seat B with screws I, making sure the knob faces towards the front. D L B STEP 3 Put the seat over the base parts making sure the tip of the gas lift E enters into the hole of the mechanism D.
P.4 STEP 4 Hardware J M6x25 4 Pcs Assemble the armrests G to the seat B on their respective sides using screws J. Screw them loose and do not tighten them to allow flexibility for the next step. L G-L G-R LEFT RIGHT J • • B STEP 5 Hardware J M6x25 K L 4 Pcs Assemble the backrest A to the armrests G with screws J. Proceed to tighten all the screws, and cover the holes with K. A J 8 Pcs K K J ALL DONE! Give yourself a nice pat on the back.
P.5 CHAIR’S FUNCTIONS ① To raise or lower the chair’s height, pull UP the lever that is under the seat. The chair goes down while sitting on it, or up if you lift your body. ② To make the chair tilt freely, pull the same lever OUT horizontally to unlock this function. When the chair is in the normal upright position, push the lever IN to lock again. ③ To adjust the tension for the tilting function, turn the mechanism’s knob in either direction to apply more or less tension.
P.6 TECHNI MOBILI CHAIR WARRANTY TASK/KID'S CHAIR: 1-YEAR WARRANTY EXECUTIVE/MANAGER CHAIR: 2-YEAR WARRANTY 1. This warranty is expressly limited to the repair or replacement (at its option) of defective chair components or materials that fails under normal use as a result of a defect in materials or workmanship. This warranty is limited to merchandise purchased in the Continental United States. No assembly labor is included.
