Owner Manual

BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS
AND WARNINGS.
❶ Do a quick inventory to
make sure the package
contains all the parts and
hardware listed in the
assembly instructions.
❷ Missing, damaged
and defective parts can
be replaced at no cost to
you. Please refer to the
last page in this manual.
❸ On each step read the
instructions and analyze the
illustrations thoroughly
before proceeding to do the
assembly.
❹ Make sure you
understand which
hardware will be used
on each step. Using the
wrong size of screw, bolt
or pin might strip the
threads or cause
damage to the part in
which it is being used.
❺ To avoid
misalignments, always
leave the screws loose
and tighten them until all
pieces are positioned
correctly.
❻ Do not overtighten or
force the screws as they
might break, strip, damage
the threads of the holes or
get stuck inside the part.
❻
❼ If the hole seems too big or too small for the screw, first
make sure you are using the correct size of screw and that
it’s been installed in the correct hole. Test another of the
same screw into the same hole, as well as test the screw
onto different holes for the same part. If the hole still
appears to be too small, do not force it, it needs replacing.
P.2