Caution : You must read this before you proceed Chair Picture Label Description QTY A Seat 1 B Stainless Steel Frame 1 Description QTY ① Bolts(M8*4cm) 5 ② Flat Washer(16mm) 5 ③ Allen Key 1 Label Picture Picture
Before Beginning Assembly: Overview Seat(A) Stainless Steel Frame(B) FRONT FACING This Chair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Take out all the Parts and place them as picture show on a clean, non-marring surface.
Step 2 Table Place the Seat(A) face down onto the side of a table as shown in above picture. Step 3 Front side Place Stainless Steel Frame(B) onto the bottom of the seat(A) as shown in the above picture.Align the 4 mounting positions on the frame with those on the underbase of the seat.Attach the frame to the seat by using Flat Washer(②) & Bolt (①) with Allen Key( ③). Note:Pls make sure use the right front side of Stainless Steel Frame(B) when attach to the Seat(A).
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. Do not place furniture under direct sunlight. Do not place furniture near heating or cooling vents. Do not write on furniture without a padded barrier to protect the surface. Do not place furniture outside . For indoor use only . Not for commercial use. For residential use only . Stains may be removed with mild soap solution and damp cloth. Children should not climb or jump on the furniture.
