Owner Manual
Step 2
Step 3
Step 4
Place the Seat(A) face down onto the side of a table as shown in above picture.
Place Stainless Steel Frame(B) onto the bottom of the seat(A) as shown in the above
picture.Align the 4 mounting positions on the frame with those on the underbase of the
seat.Attach the frame to the seat by using Flat Washer(②) & Bolt (①) with Allen Key( ③).
Note:Pls make sure use the right front side of Stainless Steel Frame(B) when attach
to the Seat(A).
Turn the chair right side up.
Check for stability.
If there is no wobbles, FULLY SCREW IN ALL BOLTS.
Ensure all bolts are fully locked and secured into position.
This Chair is now ready for use.
Caution:This Chair can only be used on a flat, level surface.
Table
Front side