Installation Instructions

Pg. #3
Pg. #10
WARNING: Ensure that all connections, set screws and screws are securely
tightened before the next step.
To clean the fixture, turn off the power, wait for it to cool, and wipe the
fixture with a clean, soft cloth.
- Remove light kit screws and washers.
- Connect polarized connectors of light kit to corresponding connectors
found in switch housing.
WARNING: BE SURE TO TURN OFF POWER
BEFORE INSTALLING
- Carefully tuck electrical wires back into switch housing, align light kit with
switch housing and secure with three light kit screws and washers.
LIGHT KITS
DETACHABLE LIGHT KITS
for your model)
(Refer to one of the following light kits
1. Wooden Joist
2. Approved (CSA for Canada
and UL for U.S.) ceiling fan box
(not provided)
3. Ceiling
4. J-Hook
5. Rubber Gasket
6. Screws & Lock Washers
(set of 4)
7. Mounting Bracket c/w Ground
Wire
8. Outlet Box Screws (not provided)
9. Rubber Ring
10. Lock Pin
11. Hemisphere Jam Screw
12. Hemisphere
13. Upper Motor Housing Screws
& Lock Washers
14. Downrod c/w Ground Wire
15. Ceiling Canopy
16.
Rubber Bushing
17.
Bolt
18.
Motor Assembly
19.
Jam Screws
20.
Cotter Pin
21.
Flat Washer
22.
23.
With Downrod
Without Downrod
1.
2.
3.
4.
5.
6.
7.
8.
ASSEMBLY DRAWING
Yoke Cover
25.
24.
24.
25.
Fig.1
10.
11.
12.
13.
14.
15.
18.
15.
17.
19.
20.
21.
22.
9.
19.
16.
23.
Light Kit
Blade
Motor Screw & Lock Washer
7.
Motor
Light Kit
Screws
Light Kit
Switch Housing
White Wires
Lock washer
Black, Blue or
Red Wires
Fig.9
Black, Blue or
Red Wires