Installation & Assembly

ManualsBrandsOrren Ellis ManualsLightingEastep 1-Light LED Flush Mount

2.)

1.)

3.)

(L)positive

(N)neutral

ground wire

(green wire)

(A)

(B)

(A)

(B)

(A)

(B)

(A)

Mounting Bracket

(B)

Canopy

68W LED

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation

Locate all hardware & components before discarding packaging

Cleaning & Care:

Page 2 of (2)

Clean with soft cloth and a mild detergent.

Do not use abrasive cleaner.

PRODUCTS ARE NOT INTENDED

FOR COMMERCIAL USE.

Page 1 of (2)

Please consult your electrician for hanging fixture and wiring.

MADE IN CHINA

The fixture is designed to dim with a standard

Triac forward phase dimmer. Dimming levels

will vary by dimmer.

Below is a list of recommended dimmers:

Lutron MACL-153M

Lutron DVL-153P

Lutron SCL-153P

Leviton IPL06-10Z

Leviton 6674-POW

Due to the inrush current wattage should not

exceed 150 watts of product for a 600 watt

dimmer

WARNING: WIRES NEED TO BE CONNECTED

TO DRIVER FOUND IN CANOPY AND SHOULD

NOT CONNECT DIRECTLY TO POWER SOURCE

OR A SHORT MIGHT OCCUR.

Remove Bracket (A) from fixture and

install to electrical box.

Wire fixture to wires in outlet box.

Install Green wire to Ground Screw.

Install Body (B) to Canopy (A) and

tighten screws on the sides of the

canopy to secure.

Step 3:

Step 2:

Step 1:

PRODUCT NAME： LED Flush Mount