‘The fixture is designed to dim with a standers ‘Traci forward phase dimmer Dimming levels will vary by dimmer. Below is a list of recommended dimmers: Lu tron MA CL-153M Lu tron DVL-153P Lu tron S CL-153P Levi ton IPLOG-10Z Levi ton 6674-POW Due to the inrush current wattage should not emceed 150 watts of product for a 600 watt dimmer. 'WARNING: Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur LED 6 x 4.
IMPORTANT: Turn OFF the power at the main fuse or circuit breaker box before starting installation Locate all hardware & components before discarding packaging Step.1: Remove mounting bracket (A) from back plate (C) and install to electrical box. Stop: Run wire throng stems and combine stem leather to met desired mounting height. Connect canopy to atom using washer (L) lock. ‘washer (K) and hex mt (J) to source. Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner.
IMPORTANT: Turn OFF the power at the main fuse or circuit breaker box before starting installation H/HLR Moet ok Pie S Comely [ Lour Glasses: sod sloes Back Mate Sec oms Tues Locate all hardware & components before discarding packaging H Step.3: Wire the fixture using the terminal block. The low voltage wires from the driver are already connected. Connect the black wire to the fixture’s black wire and red wire to the fixture’s red wire. Install the fixture to the mounting bracket using screws (B) provided.
