The fixture is designed to dim with a standard Levi ton 6674-POW Dune to the inrush current wattage should not exceed 150 watts of product for a 600 watt dimmer, 'WARNING: Wires node to be connected to driver fund in canopy and should not be connected directly fo power source or a short mey occur LED 8 x4.
IMPORTANT: Turn OFF the power at the main fuse or circuit breaker box before starting installation “‘Hn— Back Plate Crows &fw Conn Step.1; Remove mounting bracket (A) from back plate (C) and install to electrical box. Sidestep: Run wire through atoms and combos stem Lengths fo met desired mounting bought. Connect canopy to stein using washer (L) lock ‘washer (K) and hexagon () to secure, Cleaning & Care: Clean with soft cloth and a mild detergent. Do not use abrasive cleaner.
IMPORTANT: Turn OFF the power at the main fuse or circuit breaker box before starting installation Drown Cuisine Back Plato Screws Hnl A Mounting Hardware Back Plato Crows Canopy [ Cl oar Glans ™ o) fates ABCS Tubes PCS PCS s wcs »cs 8tep.3: Wire the fixture using the terminal block. The low voltage wires from the driver are already connected. Connect the black wire to the fixture’s black wire and red wire to the fixture’s red wire. Install the fixture to the mounting bracket using screws (B) provided.
