Installation & Assembly

Table Of Contents

Safety recommendations

2. Before use of the product carefully read the whole operation manual.

3. The product is purposed for interior use only, suitable for wet locations.

4. Protect the product against direct contact with water.

5. Assemble the product only with the use of parts provided and the housing;

improper assembly may result in device failing which could damage the product,

personal property or cause injury.

6. Assembly shall follow with accessories delivered with the set only.

7. The device is not a toy, keep out of reach of children.

Specifcations:

Power consumption: 16.5W / 21.5W

Life span: 50,000h

Light Disk

Risk of electric shock – this product must be installed in accordance

with applicable installation codes by a person familiar with mentioned

above codes and hazards involved. disconnect power at circuit breaker

or fuse before installing or servicing.

Operating Voltage: 120VAC

Dimming: Triac

Simple Drum LED Flush Mount

PAGE 1
Simple Drum LED Flush Mount Safety recommendations 1. Risk of electric shock – this product must be installed in accordance with applicable installation codes by a person familiar with mentioned above codes and hazards involved. disconnect power at circuit breaker or fuse before installing or servicing. 2. Before use of the product carefully read the whole operation manual. 3. The product is purposed for interior use only, suitable for wet locations. 4.
PAGE 2
OR 4" 2.75" 7" fixture 10" fixture STEP 1a: For 4'' Jbox, 7'' ﬁxture can be installed to Jbox direclty without crossbar. For 2.75'' Jbox, 10''ﬁxture can be installed to Jbox direclty without crossbar. STEP 1b: Attach bracket to jbox using 2 screws (provided). 1. For 2.75'' and 3" Jbox, install 7'' fixture by attaching 2 long screws to 4'' holes of crossbar according to marking. 2. For 3'' and 4'' Jbox, install 10'' fixture by attaching 2 long screws to 2.75'' holes of crossbar according to marking.