Installation & Assembly

2 3
• Clean with a soft or damp cloth. While cleaning with the damp cloth make sure
the power is off.
5 Year limited warranty
The purchased product is covered with a 5 year warranty in respect of any defect in material
or workmanship after purchase date.
We shall bear no responsibility on account of guarantee, as well as shall bear no
liability for any faults, in case of improper operation, use negligence, accident or
exposure to natural hazard, or excessive use over the limits specifed for the unit, or if
any unauthorized alteration or repair followed.
• Do not clean with liquids or abrasives.
Dimming
This product is compatible with most residential type dimmers available on the market.
The dimming performance will depend on kind of dimmer and dimmer settings.
Cleaning
STEP 2: Remove acrylic lens from base by turning
counter clockwise. Remove sticker.
Fixture installed.
STEP 8:
STEP 7: Align two tabs on inside wall of light base
to threads on acrylic lens. Turn CLOCKWISE
untill lens locks in place.
STEP 3: Connect wires to AC cables from junction box
with wire nuts (provided): L side to Black AC wire N side
to White AC wire. Ground to Ground wire
STEP 5: Carefully push and feed all wires back in to the
Jbox. Align the two mounting holes on the fixture body
to the two long screws of the crossbar.
STEP 6: Twist clockwise and push to lock fixture in place.
Secure base to crossbar by tightening two screws.
For wet location usage, please caulk the edge of
fixture with glue to ceiling.
4" 2.75"
STEP 1b: Attach bracket to jbox using 2 screws
(provided). 1. For 2.75'' and 3" Jbox, install 7'' fixture by
attaching 2 long screws to 4'' holes of crossbar
according to marking. 2. For 3'' and 4'' Jbox, install 10''
fixture by attaching 2 long screws to 2.75'' holes of
crossbar according to marking.
STEP 1a: For 4'' Jbox, 7'' fixture can be installed to Jbox
direclty without crossbar. For 2.75'' Jbox, 10''fixture can
be installed to Jbox direclty without crossbar.
10" fixture7" fixture
OR