Installation & Assembly

Table Of Contents

PAGE 1
PRODUCT NAME: Bath Vanity Please consult your electrician for hanging fixture and wiring. vary by dimmer. Below is a list of The fixture is designed to dim with a standard Traci forward phase dimmer. Dimming levels will Lu tron MA CL-153M Lu tron DVL-153P Lu tron S CL-153P Levi ton IPL06-10Z Levi ton 6674-POW Hue to inrush current, wattage should not exceed 150 Watts of product for a 600 Watt dimmer. recommended dimmers: PRODUCTS ARE NOT INTENDED FOR COMMERCIAL USE.
PAGE 2
IMPORTANT: Tum off the power at the main fuse or circuit breaker box before starting installation a D E Locate all hardware & components before discarding packaging 1) Step.1: Remove back plate (A) from fixture (B) and install to electrical box. Mark where anchors meet the wall. Drill holes using 3/16” = drill bit where marked. Install back plate (A) to outlet box and attach anchors to secure bracket at ends. 2) Step.2: Wire fixture to wires in outlet box. Copper wire is for Ground.