Installation & Assembly
Pod Instruction Sheet
Step 1
Step 2
Step 3
Step 4
Find the back of the slipcover and slip over the
back of the chair taking care to line up the seams.
(Illustration A)
Next pull the cover over the seat portion of the chair,
making sure that your corners and seams are all
aligned with the edges of the base (Illustration B)
Checklist of Items for Assembly:
1.) Slipcover
2.) Base
Illustration A
Illustration B
Illustration D
Illustration C
At the bottom of the chair, afx the Velcro® piece
to the underside of the chair. It may help to rest
the back of the chair on the floor so you can easily
access the Velcro®. Repeat with remaining sides.
(Illustration C)
Finish the cover by sliding your hands down the back
and tucking the excess between the back and seat
adjoining the Velcro® tabs hidden inside (Illustration
D). It is easiest to start at the center, working your
way to the edges. Reverse these steps to remove the
cover for easy care.