Installation Guide

page 9
Troubleshooting.
Warranty.
Parts Replacement.
WARNING: Failure to disconnect power supply
prior to troubleshooting any wiring issues may
result in serious injury.
Problem: Fan fails to operate.
Solutions:
1. Check wall switch to fan/wall control.
2. Verify that reverse switch is set completely in
either direction.
3. Check to be sure fan is wired properly.
4. Verify that slider switch for fan is set on High,
Medium, Medium-Low or Low speed.
5. Check to be sure wall control is wired properly.
Problem: Light kit not lighting.
Solutions:
1. Check wall switch to fan/wall control.
2. Check to be sure wires in canopy are wired
properly.
3. Verify that molex connections in LED light kit
are properly connected.
Problem: Fan operates but light fails.
Solutions:
1. Check to be sure wires in canopy are wired
properly.
2. Verify that molex connections in LED light kit
are properly connected.
3. Verify that wall control is wired properly.
Problem: Fan wobbles.
Solutions:
1. Check to be sure set screw(s) on motor
housing yoke is (are) tightened securely.
2. Check to be sure set screw on hanging ball is
tightened securely.
For parts and information, please refer to
"Parts Inventory" on page 2.