Assembly Instructions

ASSEMBLY RATING

Tools Required For Assembly:







 



O 

Allen Wrench

(Included) �

2 PERSONS RECOMMENDED

Page 1 of 4

ASSEMBLY INSTR

PAGE 1
ASSEMBLY INSTRUCTIONS ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
PAGE 2
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST,CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE. BASIC ASSEMBLY TECHNIQUES When lock or spring washer is used in an assembly, please make sure the lock or spring washer is placed between the larger flat washer and the head of the screw or bolt. Position each part correctly and insert screws or bolts into their respective holes by hand tighten or using the proper hand tool.
PAGE 3
PAGE 4
Apply the foot pads (#D) onto the bottom of the seat frame. I. Apply 4 pads (#E) on the pre-drilled holes on the seat (#1). Align the seat frame (#2) to the pads on the pre-drilled holes located under the seat (#1). II. Prepare 4 bolt assemblies by inserting a flat washer (#B) onto the bolt (#A). Insert into the seat frame and secure using the Allen wrench (#C). Carefully turn the completed chair upright. Make sure the chair is rested on a flat surface and does not feel loose or wobbly.