Installation & Assembly

5
Before touching a screw driver thoroughly
read these instructions.
Warning/Caution: Before installing fan, turn off
power at service panel and check all visible
screws and bolts for tightness.
1. Replace the coupling cover and fan housing
to the fan motor by using the screws previ-
ously removed (Fig. 8)
2. Remove the decorative canopy bottom cover
from the canopy by turning the cover counter
clockwise. (Fig. 9)
3. Remove the hanger bracket from the canopy
by removing the 1 of 2 screws from the
bottom of the hanger bracket and loosening
the other one a half turn from the screw
head. Next, turn the canopy counter clock-
wise to removing the hanger bracket from the
canopy. (Fig. 9)
4. Secure the hanger bracket to the ceiling outlet
box using screws and washers included with
your outlet box. (Fig. 10)
Figure 10
6. HANGING THE FAN
Figure 9
Figure 8
Ceiling
hanger
bracket
Ceiling
canopy
Canopy
cover
Fan motor
Motor
housing
Coupling cover
Screws
Tab
Mounting screws
(supplied with
electrical box)
UL Listed
electrical
box
Hanger bracket