Assembly & Installation Instructions

ManualsBrandsOrren Ellis ManualsBathroom Vanity LightingPendley 3-Light Vanity Light

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT

BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.

NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

Contents of Spare Parts:

Assembly Kit

(1 SET)

Fig. 1

Fixer

Set screw

Glass Holder

Glass

Rod

Glass Rod

1 PC

211mm

Glass Rod

2 PCS

188mm

Glass Rod

2 PCS

Glass Rod

2 PCS

Glass Rod

3 PCS

Glass Rod

2 PCS

Glass Rod

2 PCS

Glass Rod

2 PCS

Glass Rod

1 PC

Glass Rod

2 PCS

170mm 161mm 154mm 92mm112mm118mm129mm145mm

(154mm)

(118mm)

(170mm)

(154mm)

(92mm)

(129mm)

(188mm)

(170mm)

(211mm)

(161mm)

(188mm)

(145mm)

(112mm)

(129mm)

(92mm)

(161mm)

(154mm)

(118mm)

(145mm)

Fig. 2

Summary of content (2 pages)

PAGE 1
ASSEMBLY AND INSTALLATION INSTRUCTIONS WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE. NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements. 2. READ AND SAVE THESE INSTRUCTIONS.
PAGE 2
Wire Nut Fixture Grounding Wire House Grounding Wire Green Grounding Screw Shade Outlet Box Mounting Screw LED Max.3W (included) Anchor Lamp Holder Mounting Plate Set Hole Dry Wall Screw Fixture Wire Fixture Mounting Screw Back Plate 1. Unscrew four fixture mounting screws, and remove the mounting plate from the back plate. 2. Fix the mounting plate to the wall.