LED CHANDELIER Français p.
PACKAGE CONTENTS B A G D F H E C PART A B C D DESCRIPTION Upper Canopy Mounting Bracket LED Assembly Compression Fitting QTY 1 1 1 3 PART E F G H 2 DESCRIPTION Cable Lower Canopy LED Housing Threaded Cap QTY 3 1 1 1
HARDWARE CONTENTS AA BB CC Threaded Wire Knob Connector Short Qty: 3 Machine Qty: 2 Screw Qty: 2 DD Anchor Qty: 4 EE Anchor Screw Qty: 4 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated assembly time: 30 minutes to 1 hour Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, ladder, safety glasses. ASSEMBLY INSTRUCTIONS 1. Unscrew threaded cap (H) from the LED housing (G) in order to lower the upper canopy (F).
ASSEMBLY INSTRUCTIONS 4. Orient the mounting bracket (B) so that the preassembled screws are facing away from the outlet box (not included). Connect the mounting bracket (B) to the outlet box with short machine screws (BB). Outlet Box 4 Hardware Used BB Short Machine Screw x2 BB B 5. Screw anchor screws (EE) through mounting bracket (B) and into anchors (DD). Hardware Used Anchor EE Screws 5 DD x4 B EE 6.
ASSEMBLY INSTRUCTIONS 7. Wire connection guide: Ground wire: 7 • For installation in the United States: Wrap ground wire from outlet box around ground screw preaqssembled on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw.
ASSEMBLY INSTRUCTIONS 9. Pass lower canopy (F) over the LED housing (G) and secure with threaded cap (H). 9 G F H CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. TROUBLESHOOTING PROBLEM Fixture does not light. POSSIBLE CAUSE CORRECTIVE ACTION 1. Fixture may be wired incorrectly. 7 1. Check wiring.
WARRANTY We warrant that our products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser. LED Rail, LED Lanterns. LED W all Sconces, LED Pendants and LED Chandeliers for single family residences are warranted for one (1) year on the Light Engine and all other electrical components.
REPLACEMENT PARTS LIST PART B AA BB CC DD EE DESCRIPTION Mounting Bracket Wire Connector Short Machine Screw Threaded Knob Anchor Anchor Screw B AA PART # XBAR83619 WC001 SCR832X050 KLRK-CH AB001 AS001 BB CC DD EE Printed in China 9
LUSTRE À DEL JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat 10
CONTENU DE L’EMBALLAGE B A G D F H E C PIÈCE A B C D DESCRIPTION Pavillon Supérieur Support de fixation Ensemble DEL Raccord à compression QTÈ 1 1 1 3 PIÈCE E F G H 11 DESCRIPTION Câble Pavillon inférieur DEL Capuchon fileté QTÈ 3 1 1 1
QUINCAILLERIE INCLUSE AA BB Capuchon de connexion Vis à Qté : 3 métaux courte Qté : 2 CC Bouton fileté Qté : 2 DD EE Pièce d’ancrage Vis à pièce d’ancrage Qté : 4 Qté : 4 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Ne faites JAMAIS de travail sans couper l'électricité. • Rendez-vous au coffre de fusibles principal ou au disjoncteur de votre demeure.
PREPARATION Avant de commencer l’assemblage du produit, assurez-vous d’avoir toutes les pièces. Comparez les pièces dans l’emballage avec la liste du contenu. S’il y a des pièces manquantes ou endommagées, ne tentez pas d’assembler le produit. Temps d’assemblage approximatif : de 30 à 60 minutes Outils requis pour l’assemblage (non fournis) : tournevis cruciforme, tournevis à tête plate, pinces à dénuder, ruban isolant, échelle, lunettes de sécurité. INSTRUCTIONS POUR L'ASSEMBLAGE 1.
ASSEMBLY INSTRUCTIONS 4. Orient the mounting bracket (B) so that the preassembled screws are facing away from the outlet box (not included). Connect the mounting bracket (B) to the outlet box with short machine screws (BB). Outlet Box 4 Quincaillerie utilisée BB Short Machine Screw x2 BB B 5. Screw anchor screws (EE) through mounting bracket (B) and into anchors (DD). 5 DD Quincaillerie utilisée Anchor EE Screws x4 B EE 6.
ASSEMBLY INSTRUCTIONS 7. Wire connection guide: Ground wire: 7 • For installation in the United States: Wrap ground wire from outlet box around ground screw preaqssembled on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA). • For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around ground screw on mounting bracket (B). Tighten ground screw.
ASSEMBLY INSTRUCTIONS 9. Pass lower canopy (F) over the LED housing (G) and secure with threaded cap (H). 9 G F H CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. TROUBLESHOOTING PROBLEM Fixture does not light. POSSIBLE CAUSE CORRECTIVE ACTION 1. Fixture may be wired incorrectly. 16 1. Check wiring.
WARRANTY We warrant that our products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser. LED Rail, LED Lanterns. LED Wall Sconces, LED Pendants and LED Chandeliers for single family residences are warranted for one (1) year on the Light Engine and all other electrical components.
REPLACEMENT PARTS LIST PART B AA BB CC DD EE DESCRIPTION Mounting Bracket Wire Connector Short Machine Screw Threaded Knob Anchor Anchor Screw B AA PART # XBAR83619 WC001 SCR832X050 KLRK-CH AB001 AS001 BB CC DD EE Printed in China 18
