Assembly Instructions

2. The hanging length of the cable (E) for this

fixture is adjustable. Hold the fixture canopy

(A) up against the ceiling to determine the

desired length before the entire fixture is

assembled.

The cable (E) is held in place by a

compression fitting (D). Push up, and hold,

the fitting’s spring loaded tube (D) to release

the cable (E) for adjustment.

Hardware Used

3. Temporarily raise mounting bracket (B) to ceiling.

Mark location for anchor (DD). Use 9/32 size drill

to drill holes for anchor (DD). Insert anchor (DD)

into hole.

1. Unscrew threaded cap (H) from the LED housing

(G) in order to lower the upper canopy (F).

x 4Anchor

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package

contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated assembly time: 30 minutes to 1 hour

Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers,

electrical tape, ladder, safety glasses.

ASSEMBLY INSTRUCTIONS

Ceiling