Fire Feature Manual

11
Connecting the Socket
Coat the gas supply pipe nipple with gas resistant pipe compound or approved Teflon PTFE tape.
Screw socket onto gas supply pipe (house gas source) as shown to the right, and wrench tighten.
The quick disconnect socket should never be connected to the fire table. Direction of gas flow is
indicated on the socket.
Using the Quick Connect Socket
Pull back the sleeve on the quick disconnect socket and insert the unattached end of the gas hose
into the socket.Release the sleeve and continue pushing the hose into the socket until the sleeve
snaps into the locked position. After making all connections, perform a leak test as described on
page 13 of this manual.
3
Wall
4
Wall
ASSEMBLY INSTRUCTIONS NATURAL GAS
(CONTINUED)