Fire Feature Manual

WARNING

Before using this outdoor fire table, make sure you have read, understand and are following all

information provided in the Important Safety Information section of this manual. Failure to follow

those instructions can cause death, serious injury or property damage.

Prior to each gas fire table operation, check the hose and valve for evidence of excessive wear or

damage. Replace damaged or worn out hoses before using the fire table.

BURNER CONNECTIONS:

Make sure the regulator valve and hose connections are securely fastened to the burner and the

tank. If your unit was assembled for you, visually check the connection between the burner pipe

and orifice.

WARNING

Failure to inspect this connection or follow these instructions

could cause a fire or an explosion, which can cause death,

serious bodily injury, or damage to property.

Please refer to diagram for proper installation.

wipe away solution and proceed. Check for leaks at these locations

PRE-USE INSTRUCTIONS

If the burner pipe is not fastened to the orifice assembly securely, please

CHECKING FOR LEAKS:

Make a leak check solution by mixing 1 part dish

washing soap with 3 parts water in a spray bottle.

Make sure the gas source is on or open and the

control knob is “OFF.”

Spray leak solution on the valve connections while paying

particular attention to the areas indicated by arrows.

If any bubbles appear turn the gas OFF, reconnect

and re-test. If you continue to see bubbles after several

attempts, disconnect the source and contact

us for assistance.

If no bubbles appear after one minute, turn the gas off,